Click image to view full size image
Model Number: KL-K400LA-02
Key Specifications/Special Features:
KL-K400LA is a long range wireless switch bidirectional receiver module which developed by our company recently. It mainly adopt SSC techniques to increase anti-interference performance. Max distance arrived 6kmTechnology data1．Model：KL-K400LA2．Operating voltage：DC12V (AC220/380 customized)3．Quiescent current：16mA4．Working Current：65mA5．Max load：16A6．Channel：4 ( optional 2-channel )7．Operating frequency：315-433MHz ( customized 868/915MHz )8．Receiving sensitivity：-148dBm9．Modulation type：FSK+LORA10．Operating temperatures: -10℃~+70℃
11．Size：100*68*40mm（without case）
How to add/delete remote controls
Hold the learning button on board until LED indicator light turns on and release, then press any key of remote control . If the LED blinks twice, it means learning successfully.
If need add more remote controls, only repeat step 1 is ok and 20pcs at most.
If need delete remote controls, just hold the learning button until LED indicator flashes 3 times, then release and it shows successfully.
There is dip switch on receiver ,Number 1 and 2 on dip switch used to change working mode, Push number 1 to ON position and switch work with Toggle mode , push number 2 to ON and work with Latch mode. Push 1 and 2 to ON and switch work with Momentary mode5. Number 3 used to choose whether you need feedback signal, If yes, push 3 to ON and remote will sound”Di....” once get feedback signal (remote control connect s1 with jumper).this way used to check whether receiver get signal and work usually
11．Size：100*68*40mm（without case）
How to add/delete remote controls
Hold the learning button on board until LED indicator light turns on and release, then press any key of remote control . If the LED blinks twice, it means learning successfully.
If need add more remote controls, only repeat step 1 is ok and 20pcs at most.
If need delete remote controls, just hold the learning button until LED indicator flashes 3 times, then release and it shows successfully.
There is dip switch on receiver ,Number 1 and 2 on dip switch used to change working mode, Push number 1 to ON position and switch work with Toggle mode , push number 2 to ON and work with Latch mode. Push 1 and 2 to ON and switch work with Momentary mode5. Number 3 used to choose whether you need feedback signal, If yes, push 3 to ON and remote will sound”Di....” once get feedback signal (remote control connect s1 with jumper).this way used to check whether receiver get signal and work usually
Shipping Information:
- FOB Port: Shenzhen
- Lead Time: 3 - 5 days
- Dimensions per Unit: 46 × 40 × 34 Centimeters
- Weight per Unit: 0.2 Kilograms
- Units per Export Carton: 100
- Export Carton Dimensions L/W/H: 46 × 34 × 40 Centimeters
- Export Carton Weight: 20 Kilograms
Main Export Markets:
- Asia
- Australasia
- North America